sudo openocd -f jlink.cfg -f raspi4.cfg
Open On-Chip Debugger 0.11.0+dev_BenOS (2021-09-06-21:39)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter driver' not 'interface'
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : J-Link V11 compiled Mar 4 2024 13:16:08
Info : Hardware version: 11.00
Info : VTarget = 3.308 V
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: auto0.tap: IR capture error; saw 0x0f not 0x01
Warn : Bypassing JTAG setup events due to errors
Error: Invalid ACK (7) in DAP response
Error: JTAG-DP STICKY ERROR